Reflex 105 Balanced Flue Installation Instructions

INSTALLATION INSTRUCTIONS

≈25 %

NOTE: ENSURE THAT THE LOGS ARE POSITIONED

AS ABOVE. ONLY USE THE CORRECT AMOUNT OF

LOGS AS SPECIFIED IN THE DIAGRAMS.

COMPLETION OF ASSEMBLY

Ensure that the rope seal on

the back of the glass frame is

intact.

Push the handle down.

Replace the screws. As the screws are tightened the glass frame

is pulled down against the hooks and forms a seal.

Replace ALL of the securing screws ensuring that a screw is

present in all xing slots.

UNDER NO CIRCUMSTANCES SHOULD THE

APPLIANCE BE USED IF ANY OF THE GLASS

PANELS ARE LOOSE, DAMAGED, OR MISSING.