MyFire Wifi Fitting Kit
3
Installation Instructions - Conventional Flue
NOTE: Ensure none of the wires are snagged or caught
on any internal components.
1.5 Rotate and slide the air guide into position with the ends
locatingunderthesidebrackets.
Ensure that the angled metal is sloping towards the front of
the appliance.
4
1.6 Replace the Main Burners and Fuel Effect.
2. Accessing the WiFi Module
Once installed, the WiFi module can be accessed by
following the below instruction.
2.1 Remove the Glass Frame, see Instructions provided with
appliance model.
2.2 Remove the two screws securing the WiFi Module access
panel and slide across, see Diagram 5.
5
The WiFi module is now accessible, see Diagram 6.
6
Follow the steps listed in the MyFire App Setup manual
PR2467 to connect a smart device to the re.
Once connected, replace the service hatch in reverse order.
2.3 Replace the Glass Frame.
The installation is now complete.
Once the WiFi module has been installed and
connected to a power source there is a 24 hour window
to complete the setup process on the MyFire app.
If setup is not completed in this time the WiFi module
will have to be manually reset to complete setup, see
the installation instructions supplied with the appliance.