Hearth Slips Installation User Instructions
2
Pre-Installation Instructions
IMPORTANT NOTICE
The following must be checked prior to
installation of Stone Slips, Hearths and
Mantels.
1.1 It is essential the appliance is installed
following the Decorative Front
installation method. For details refer
to the installation instructions supplied
with the appliance.
This method will leave the appliance
flange flush to the brickwork and the
edge proud of the wall, see Diagram 1.
Covering frame model numbers:
Material Slip Set for Stone Mantel Small Hearth for Stone Mantel Large Hearth for Stone Mantel
Limestone 934-121 934-193 934-351
White Marble 934-790 934-241 934-489
General
CAUTION - these materials are heavy. It is
recommended to use suitable lifting equipment
when moving the packed surround and two people
to lift each part during unpacking and assembly.
2.1 It is important to refer to the installation section of the
instruction manual supplied with the appliance, before fitting
the surround.
IMPORTANT NOTICE: When handling the stone
surrounds, take care to lift carefully and hold in the
middle of the pieces to avoid putting unnecessary
strain on the joins prior to installation.
Warning
CAUTION: Stone surrounds are extremely heavy
and must be properly secured to a solid wall.
DO NOT install onto studwork walls.
Failuretosecurethismantelrmlytoawallcould
result in parts of this surround falling.
This can lead to serious injuries or even fatalities.
Do not attempt to fix the fire surround to a wall with
adhesive alone. This product must be firmly secured to
a solid wall with substantial stainless steel fixings.
1. General requirements
1
Appliance
Flange
Appliance
Edge
IMPORTANT: FOR A
SUCCESSFUL INSTALLATION
IT IS ESSENTIAL THAT THE
APPLIANCE IS INSTALLED AT
A HEIGHT OF 123MM FROM
THE FLOOR TO THE BOTTOM
EDGE OF THE APPLIANCE
VIEWING AREA, SEE
DIAGRAM 2.
THE APPLIANCE MUST BE
INSTALLED CAREFULLY
TO ENSURE THAT IT IS
COMPLETELY LEVEL.
123
A
Detail A
Hearth
2
Bottom of Appliance
Viewing Area
Floor
Lower Slip