Harmony 10 Quick Start Guide

1. Operating the Appliance
The appliance is operated by thermostatic and
programmable remote control.
1
Via the remote it is possible to control the following features:
2
Child proof
lock
Time
Fan
Light
Eco
Mode
Signal
Indicator
Thermostatic
Mode
Auxilary
Mode
Temperature
Program
Mode
Countdown
timer
Battery
Status
NOTE: THE FAN FUNCTION IS NOT AVAILABLE ON
REFLEX MODELS
Turning the appliance On
1.1 The handset controls the appliance from pilot ignition
through to shut down.
To turn the fire on press the button until two short
signals and a series of blinking lines on the handset confirm
the start of the ignition sequence and there will be a clicking
sound as the valve opens on the appliance.
The pilot will ignite and the remote is now in Manual
Mode.
The first time the appliance is turned on it will light in
the High position.
IMPORTANT: YELLOW FLAMES TYPICALLY
APPEAR WHEN THE APPLIANCE HAS REACHED
NORMAL OPERATING TEMPERATURE. THIS CAN
TAKE UP TO 30 MINUTES.
WARNING: IF THE APPLIANCE FAILS TO LIGHT OR
BECOMES EXTINGUISHED IN USE, WAIT 3 MINUTES
BEFORE ATTEMPTING TO RELIGHT.
Countdown Timer
Turning the Timer on.
Press and hold the button until displayed, and
hour flashes.
To select the hour press the or button.
To confirm press the button. Minutes flash.
To select the minutes press the or button.
To confirm press the button or wait.
Turning the Timer off.
Press and hold the button, and countdown display
will disappear.
At the end of countdown time period, the appliance
turns off. The Countdown Timer only works in Manual,
Thermostatic and Eco modes.
Maximum countdown time is 9 hours and 50 minutes.
Child Proof Lock
Turning the Child Lock on.
Press the and buttons simultaneously. will
be displayed and the handset is rendered inoperable except
for the Off function.
Turning the Child Lock off.
Press the and buttons simultaneously to
deactivate.
will disappear.
Setting the time
Press the and buttons simultaneously. Day
flashes.
Press the or button to select a number that
corresponds with a day of the week (eg 1 = Monday, 2 =
Tuesday, 3 = Wednesday, 4 = Thursday, 5 = Friday, 6 =
Saturday, 7 = Sunday).
Press the and buttons simultaneously. Hour
flashes.
To select hour press the or button.
Press the and buttons simultaneously. Minutes
flash.
To select minutes press the or button.
To confirm press the and buttons simultaneously
or wait.
PR2339 Thermostatic Quick Start Guide Issue 1.indd 2 17/11/2016 08:02