Conventional Flue

30
Servicing Instructions - Replacing Parts
4.11 To remove the side trim lift and hook off the rebox, see
Diagram 16.
NOTE: The Side Trims only need to be removed if
damaged or the side glass needs replacing.
16
5. Main Burner
To replace the main burner:
5.1 Undo the 2 screws to remove the fuel bed trim,
see Diagram 17.
Midi T Models Only:
5.2 Slide out of the locating slot in the side trims,
see Diagram 17, Detail A.
17
Detail A
All Models:
5.3 Remove the 2 securing screws at the front of the burner, see
Diagram 18.
18
5.4 Lift the burner out of the rebox at an angle clear the
brackets, exposing the service hatch, see Diagram 19.
19
Service Hatch
Screws
5.5 Ret in reverse order.
Important: Ensure the burner engages with the injector at the
base of the rebox, see Diagram 20.
Injector
20
6. Control Assembly & Service Hatch
6.1 It is not necessary to remove the complete control assembly
to service or replace parts of this appliance. The following
sections will detail how to individually remove and replace
each element.
6.2 The Vogue has a servicing hatch to allow access to the gas
valve and control assembly in the base of the rebox.
Remove the 4 screws holding the service hatch,
see Diagram 19.
Remove the panel.
6.3 This will allow access to the rear of the valve, see Diagram 21.
21
Gas Valve
Pilot Valve
Mag
Unit
Ignition
Lead