Conventional Flue
28
3.2 The frame can be removed by lifting the hooks clear of the
slots from the bottom of the frame and lifting away from the
appliance, see Diagram 6.
6
Vogue Midi Shown
3.3 Place carefully to one side.
3.4 The glass frame must be retted to the appliance following
cleaning or servicing. Hold in position and secure with the
screws.
3.5 Replace ALL of the securing screws ensuring that a screw is
present in all xing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
4. Baffle & Liners
To access the burner tray and interior workings of the
appliance it may be necessary to remove the bafe and the
liners.
4a. Vogue Midi &
Midi Midline
BAFFLE
4.1 The bafe must be removed before the liners can be taken
out of the appliance.
To do this undo the 3 screws securing it to the roof of the
rebox, see Diagram 7.
7
4.2 The bafe can now be removed through the front of the
appliance.
BLACK GLASS LINERS
Once the bafe has been removed the liners can then be
taken out.
4.3 To remove the side liners:
Tilt towards the centre of the rebox.
Lift up and pull out of position, see Diagram 8.
8
Support the rear panel when handling the last side and
remove carefully.
4.4 Lean the top of the panel forward, lift and twist slightly to
allow removal through the front of the appliance.
9
Back Piece
Servicing Instructions - Replacing Parts