Conventional Flue

Servicing Instructions - Replacing Parts

1. General

1.1 All main components can be replaced without removing the

appliance from its installation.

IT IS ESSENTIAL THAT THE GAS SUPPLY TO THE

APPLIANCE IS TURNED OFF AT THE ISOLATION

DEVICE BEFORE PROCEEDING FURTHER.

2. Decorative Front

IMPORTANT: THE OUTER PANELLING OF THE

VOGUE MIDI IS MADE FROM CAST IRON. USE

CAUTION WHEN INSTALLING, REMOVING AND

STORING AS THE COMPONENTS ARE HEAVY AND

SHOULD BE HANDLED CAREFULLY.

Vogue Midi Models

2.1 Remove the plinth to access the controls by lifting the hooks

clear of the slots on the front of the appliance, see Diagram 1.

Vogue Midi Midline & Highline Models

2.2 Pull the lower door open from the right hand side to access

the controls, see Diagram 2.

Control

Valve

Vogue Midi Midline

Shown

All Models

2.3 Remove the frame to gain complete access to the control

valve and the viewing aperture by lifting the hooks clear of

the slots on the front of the appliance, see Diagram 3.

Vogue Midi Shown

3. Window Frame Assembly

3.1 Using a screwdriver remove the 4 screws securing the

window panel to the appliance, see Diagram 4 & 5.

Take care to support the glass when removing the screws.

Vogue Midi & Midline

Vogue Midi T - Midi, Midline & Highline