Conventional Flue
2121
8.2 Place Log A in position on the 2 locating pins,
see Diagram 20.
20
A
Midi/ Midi Midline Nat Gas Burner shown
8.3 Spread the Lava Rock evenly over the fuel bed and around
Log A, see Diagram 21.
Ensure that the fuel effect does not obstruct the pilot.
21
Midi/ Midi Midline Nat Gas Burner shown
8.4 Position the 2 embers on the lip at the front of the fuel bed,
see Diagram 22.
22
Midi/ Midi Midline Nat Gas Burner shown
8.5 Log B is positioned on the right hand locating pin, and rests
against the back liner, see Diagram 23.
Midi/ Midi Midline Nat Gas only: Log B also rests on the rear
burner bracket.
23
B
8.6 Log C rests on Log A and the front tray with the locating pin
facing up, see Diagram 24.
24
C
8.7 Log D ts onto the locating pin and rests on Log B, see
Diagram 25.
25
D
Installation Instructions