Conventional Flue

18
Installation Instructions
3.7 Lift the appliance so as to locate the key slots in the carcass
onto the xing screws. There are two large holes the lower
anges on the front edges of the base, see Diagram 5.
Wingnut
Washer
Key slots
5
3.8 Place the 2 large washers over the studs and x with 2
wingnuts, see Diagram 5.
Vogue Midi T - Highline
The appliance has four slot in the base plate to secure in
place with the screws provided.
3.9 Position the appliance and mark the holes to drill for the
screws, see Diagram 6.
Slots for
screws
6
3.10 Remove the appliance and drill the guide holes.
3.11 Insert the rawl plugs into the guide holes.
3.12 Reposition the appliance and use the wood screws in the
xing kit supplied for hearth mounting installations to secure
in place.
4. Top or Rear Exit
4.1 Before locating the appliance choose the correct ue outlet
position.
4.2 The appliance is supplied as a top exit conguration. To
switch outlets remove the cast top plate, see Diagram 7.
7
Cast top
Vogue Midi Shown
4.3 Lift off the ue collar adapter and spigot, see Diagram 8.
8
Flue spigot
Flue collar adapter
4.4 Remove the ue collar adapter supports and the ue spigot
by removing the 4 screws, see Diagram 9.
9
Collar
Supports