Brochure

Gas Flue Systems
1. Rigid or Flexible Metal Flue
With this flue system rigid metal tubes, or a combination of rigid and flexible metal tubes, extend vertically directly
from the stove to the outside of the property. This may be either straight through the ceiling or roof with the flue
pipe exposed, or by using the channel of a chimney or a studwork enclosure. The products of
combustion are
carried up the flue by natural convection.
Models which can use this system are:
Sheraton 5 Gas, Small and Medium Gas Marlborough2, Small and Medium Gas Stockton2, Gas Stockton 5,
Huntingdon 20, Huntingdon 30, Huntingdon 40, Loft, Gas Vogue Midi & Midi T, Gas Vision Small, Midi, &
Medium, Studio 1 and 2 Freestanding and Riva2 F670.
2. Balanced Flue
Where a room has no chimney, then a Balanced Flue version of a Gazco stove is a practical option. The flue
consists of one tube inside another. The outer tube brings air into the stove for combustion whilst the inner one
emits the products of combustion.
Options: A - Rear outlet (max 600mm wall thickness).
B - Top outlet/up and out (min rise 500mm, max 3m), horizontal (min 250mm, max 5m).
An additional bend can be incorporated in to the horizontal section of the ‘up and out’, dependent upon
a 1m min vertical rise.
C - Top outlet/vertical (min 3m, max 10m). Vogue Midi T / Vogue Midi T Midline (Min 2m, Max 10m)
D - Top outlet/vertical with offset (min to first bend 500mm, max flue length 10m).
Ask your retailer for full technical details or see our Concentric Flue System brochure at www.gazco.com.
Models which can use this system are:
Sheraton 5 Gas, Small* and Medium Gas Marlborough2, Small* and Medium Gas Stockton2, Gas Stockton
5, Gas Huntingdon 20*, 30 and 40, Small*, Loft, Gas Vogue Midi & Midi T, Gas Vision Small, Midi, & Medium.
Studio 1 and 2 Freestanding and Riva2 F670. (*Rear outlet only). All Balanced Flue models are log effect only.
1
2
C D
B
A
66
Optional Linerless
Flue Kit
The Sheraton 5, Vogue Midi, Vogue Midi T and Loft
conventional flue gas stoves are compatible with our
optional linerless flue kit. At just 0.5 metres long, this
short piece of flexible, stainless steel flue pipe and
debris deflector has been specifically designed to be
slotted into your masonry chimney. This eliminates
the need for the chimney to be fully lined and any
associated labour, facilitating a simpler and more cost
effective solution.
Linerless Flue Kit
Product Code: 8736
Steel Register Plate
with Clamp that holds
Flex Adapter
Flex Pipe Adapter
connects to stove
flue pipe
Stove Flue Pipe
running from the
stove to the Flex Pipe
Adapter