Balanced Flue

8
User Instructions
7. Log Layout
LOGS MUST BE POSITIONED ACCORDING TO THE
FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT
FLAME EFFECT.
All logs can be identied by a letter (A - D) on their
underside. Logs A and B have holes to locate each onto a
burner stud.
7.1 Ensure the burner tray is clean and free from any debris, see
Diagram 10.
10
7.2 Place Log A in position on the 2 locating pins,
see Diagram 11.
11
A
7.3 Spread the Lava Rock evenly over the fuel bed and around
Log A, see Diagram 12.
12
7.4 Position the 2 embers on the lip at the front of the fuel bed,
see Diagram 13.
13
7.5 Log B is positioned on the right hand locating pin, and rests
against the back liner, see Diagram 14.
14
B
7.6 Log C rests on Log A and the front tray with the locating pin
facing up, see Diagram 15.
15
C