Balanced Flue

44
Servicing Instructions - Replacing Parts
17. Explosion Relief Gasket
IMPORTANT: If it is required to access the rear
explosion relief for servicing the appliance must rst
be removed from the wall.
17.1 It is possible to change the gasket on the explosion relief
panel.
Rear Explosion Relief
17.2 Remove the 6 screws on each spring panel and the 4 from
the centre bracket.
34
Rear of Appliance
Rear Explosion Relief
17.3 Remove the gasket and replace.
Ensure when replacing that the springs are located into the
recess.
17.4 Refit in reverse order.
Lower Explosion Relief
17.5 Remove the 5 screws on each spring panel,
see Diagram 35.
35
Underside of Appliance
Lower Explosion Relief
17.6 Remove the gasket and replace.
Ensure when replacing that the springs are located into the
recess.
17.7 Refit in reverse order.