Balanced Flue

36
Servicing Instructions - Replacing Parts
All Models
2.3 Remove the frame to gain complete access to the control
valve and the viewing aperture by lifting the hooks clear of
the slots on the front of the appliance, see Diagram 3.
3
Vogue Midi Shown
3. Window Frame Assembly
3.1 Using a screwdriver remove the 4 screws securing the
window panel to the appliance, see Diagram 4.
Take care to support the glass when removing the screws.
Vogue Midi & Midline
4
Vogue Mid, Midline & Highline T 3 Sided
5
1. General
1.1 All main components can be replaced without removing the
appliance from its installation.
IT IS ESSENTIAL THAT THE GAS SUPPLY TO THE
APPLIANCE IS TURNED OFF AT THE ISOLATION
DEVICE BEFORE PROCEEDING FURTHER.
1.2 Removal of Flue
If, for any reason, the ue has to be removed from the
appliance, the seal must be replaced in the inner spigot.
2. Decorative Front
IMPORTANT: THE OUTER PANELLING OF THE
VOGUE IS MADE FROM CAST IRON. USE CAUTION
WHEN INSTALLING, REMOVING AND STORING AS
THE COMPONENTS ARE HEAVY AND SHOULD BE
HANDLED CAREFULLY.
Vogue Midi Models
2.1 Remove the plinth to access the controls by lifting the hooks
clear of the slots on the front of the appliance, see Diagram 1.
1
Vogue Midi Midline Models
2.2 Pull the lower door open from the right hand side to access
the controls, see Diagram 2.
2
Control
Valve
Vogue Midi Shown