Balanced Flue
30
9.2 Place Log A in position on the 2 locating pins,
see Diagram 37.
37
A
9.3 Spread the Lava Rock evenly over the fuel bed and around
Log A, see Diagram 38.
38
9.4 Position the 2 embers on the lip at the front of the fuel bed,
see Diagram 39.
39
9.5 Log B is positioned on the right hand locating pin, and rests
against the back liner, see Diagram 40.
40
B
Installation Instructions
9.6 Log C rests on Log A and the front tray with the locating pin
facing up, see Diagram 41.
41
C
9.7 Log D ts onto the locating pin and rests on Log B, see
Diagram 42.
42
D
9.8 Sparingly spread an amount of the Embaglow bres provided
on the sections highlighted, see Diagram 43.
Take care not to use more than half a packet per application.
WARNING - DO NOT PLACE NEAR THE PILOT AREA.
43