Balanced Flue

21
Installation Instructions
3. Installation of the Appliance
IMPORTANT: THE OUTER PANELLING OF THE
VOGUE MIDI IS MADE FROM CAST IRON. USE
CAUTION WHEN INSTALLING, REMOVING AND
STORING AS THE COMPONENTS ARE HEAVY AND
SHOULD BE HANDLED CAREFULLY.
Vogue Midi Models
3.1 Remove the plinth to access the controls by lifting the hooks
clear of the slots on the front of the appliance, see Diagram 1.
1
Vogue Midi Midline & Highline Models
3.2 Pull the lower door open from the right hand side to access
the controls, see Diagram 2.
2
Control
Valve
All Models
3.3 Remove the frame to gain complete access to the control
valve and the viewing aperture by lifting the hooks clear of
the slots on the front of the appliance, see Diagram 3.
3
Securing the Appliance to the Hearth
Vogue Midi & Vogue Midi T 3 Sided
The appliance sits on a mounting bracket to secure it in
place to either the hearth or bench.
3.4 Position the appliance:
Loosely attach the bracket to the appliance and place
centrally on the hearth OR in the desired position on the
bench. Remove the appliance leaving the bracket in the
correct position and mark the holes to drill the bracket
screws, see Diagram 4.
Brackets
4
3.5 Remove the bracket and drill the guide holes.
3.6 Fix the bracket either to the hearth or the bench, see
Diagram 4.
NOTE: Use the wood screws and rawl plugs in the xing
kit supplied for hearth mounting installations and the
coach bolts supplied with the bench for installation onto
a bench.