Conventional Flue

31
Servicing Instructions - Replacing Parts
2.8 Secure the base of the glass door with the 4 screws
previously removed, see Diagram 2.
2.9 Replace ALL of the securing screws, ensuring that a screw is
present in all xing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
3. Baffle & Liners
To access the burner tray and interior workings of the
appliance it may be necessary to remove the bafe and the
liners.
BAFFLE
3.1 The bafe consists of 2 parts, the Main Bafe and the Rear
Bafe.
To remove the Main bafe, undo the 4 screws, and
manoeuvre through the rebox, see Diagram 5.
5
3.2 To remove the Rear bafe, undo the 3 screws, see
Diagram 6.
6
REAR PANEL & TRIMS
3.3 The rear panel is in one piece. Undo the 2 screws and lean
forward to remove.
Support the Black Glass Liner.
7
8
To make removal of the rear panel easier, it may be
necessary to remove the burner tray, see Section 4.
3.4 To remove the fuel bed trim undo the 2 screws and slide out
of the locating slot in the side trims, see Diagram 9, Detail A.
9
Detail A