Conventional Flue

ManualsBrandsGazco ManualsGas StovesGas Stoves

Installation Instructions

9. Completion of Assembly

9.1 Angle the top of the glass door towards the appliance and

locate the top hooks into the bars of the appliance, see

Diagram 42.

9.2 Push the base of the glass door against the appliance and

lower.

9.3 Secure the base of the glass door with the 4 screws

previously removed, see Diagram 43.

9.4 Replace ALL of the securing screws, ensuring that a screw

is present in all xing slots.

UNDER NO CIRCUMSTANCES SHOULD THE

APPLIANCE BE USED IF ANY OF THE GLASS

FRAME RETAINING SCREWS ARE LOOSE OR

MISSING.

9.5 Fit the cast access panel by locating the hooks on the pins

on the front of the appliance, see Diagram 44.

10. Lighting the Appliance

The appliance is operated by thermostatic remote control.

This remote controls the appliance from pilot ignition through

to shut down.

In ‘MANUAL MODE’ you can:

— light the pilot

— turn on the main burner

— regulate the flame from low to high and back

— turn off the burner leaving just the pilot burning

In ‘TEMP MODE’ you can:

— set the room temperature so the stove automatically

maintains that temperature

In ‘TIMER MODE’ the appliance:

— turns on and off according to the set time periods

— automatically regulates the room temperature during

the set periods

10.1 Turning the appliance On

Your remote can control the gas appliance from pilot ignition

through to shut down.

To turn the appliance on press the OFF button and the UP

button simultaneously. You hear several short signals.

The pilot and main burner ignite and the remote is now

in Manual Mode:

Turning the appliance Off:

Press the OFF button to turn the appliance off.

FOR SAFETY, YOU MUST WAIT 30 SECONDS BEFORE

LIGHTING THE APPLIANCE AGAIN.

IMPORTANT: YELLOW FLAMES TYPICALLY

APPEAR WHEN THE APPLIANCE HAS REACHED

NORMAL OPERATING TEMPERATURE. THIS CAN

TAKE UP TO 30 MINUTES.

WARNING: IF THE APPLIANCE FAILS TO LIGHT OR

BECOMES EXTINGUISHED IN USE, WAIT 3

MINUTES BEFORE ATTEMPTING TO RELIGHT.

FOR FULL OPERATING INSTRUCTIONS AND

TROUBLESHOOTING SEE USER SECTION.