Conventional Flue

17
2.7 Swap the ue spigot only with the Blanking Plate on the rear
of the appliance and replace ue collar adapter supports,
see Diagram 4.
4
Outer
Blanking
Plate
2.8 Attach the decorative ue blanking plate to the underside
of the Decorative ue collar using the screws provided, see
Diagram 5.
5
If installing a Top Extension Section, follow Section 4.
Installation without Top Extension Section:
2.9 Sit the decorative ue blanking plate in position, see
Diagram 6.
6
2.10 Replace the cast top plate. When tted properly the cast top
plate should sit ush with the rear of the appliance,
see Diagram 7.
7
2.11 Secure the cast top plate with the 3 screws previously
removed, see Diagram 8.
8
Installation Instructions