Balanced Flue

39
Servicing Instructions - Replacing Parts
2.9 Replace ALL of the securing screws, ensuring that a screw is
present in all xing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
3. Baffle & Liners
To access the burner tray and interior workings of the
appliance it may be necessary to remove the bafe and the
liners.
BAFFLE
3.1 The bafe consists of two parts, the Main Bafe and the
Rear Bafe.
To remove the Main bafe, undo the 3 screws, and
manoeuvre through the rebox, see Diagram 5.
5
Note: when replacing the Main bafe ensure that the Main
Bafe ap rests on the Rear Bafe, see Diagram 6.
6
Main Bafe
Rear Bafe
Main Bafe Flap
3.2 To remove the Rear bafe, undo the 2 screws,
see Diagram 7.
7
Note: When replacing the Rear Bafe ensure that the tab
locates behind the rear panel slot, see Diagram 8.
8
Rear Panel
Rear Bafe
REAR PANEL & TRIMS
3.3 The rear panel is in one piece. Undo the 4 screws and lean
forward to remove.
9
To make removal of the rear panel easier, it may be
necessary to remove the burner tray, see Section 4.
3.4 To remove the fuel bed trim undo the 2 screws and slide
out of the locating slot in the side trims, see Diagram 10,
Detail A.
10
Detail A