Balanced Flue

33
Installation Instructions
10.7 Log D ts onto the locating pin and rests on Log B, see
Diagram 59.
59
D
10.8 Sparingly spread an amount of the Embaglow fibres provided
on the sections highlighted, see Diagram 60. Take care not
to use more than half a packet per application.
60
11. Completion of Assembly
11.1 Angle the top of the glass door towards the appliance and
locate the top hooks into the bars of the appliance, see
Diagram 61.
61
11.2 Push the base of the glass door against the appliance and
lower.
11.3 Secure the base of the glass door with the 4 screws
previously removed, see Diagram 62.
62
11.4 Replace ALL of the securing screws, ensuring that a screw is
present in all xing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
11.5 Fit the cast access panel by locating the hooks on the pins
on the front of the appliance, see Diagram 63.
63