Balanced Flue

32
Installation Instructions
It is essential to use high quality batteries (Duracell or
equivalent) when replacing batteries in the handset or
control box.
PLEASE ENSURE NO WIRES ARE TRAPPED
BEFORE REPLACING THE PLINTH.
THE LEAD IS EASILY DAMAGED.
10. Log Layout
LOGS MUST BE POSITIONED ACCORDING TO THE
FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT
FLAME EFFECT.
All logs can be identied by a letter (A - D) on their
underside. Logs A and B have holes to locate each onto a
burner stud.
10.1 Ensure the burner tray is clean and free from any debris, see
Diagram 53.
53
10.2 Place Log A in position on the 2 locating pins,
see Diagram 54.
54
A
10.3 Spread the Lava Rock evenly over the fuel bed and around
Log A, see Diagram 55.
55
10.4 Position the 2 embers on the lip at the front of the fuel bed,
see Diagram 56.
56
10.5 Log B is positioned on the right hand locating pin, and rests
against the back liner, see Diagram 57.
57
B
10.6 Log C rests on Log A and the front tray with the locating pin
facing up, see Diagram 58.
58
C