Balanced Flue

26
Installation Instructions
Top Box Section
Note: Installation is easier with the door removed - see
Section 8.
5.15 Secure the Mounting bracket to the wall as described in
Section 5.3 - 5.6. Do not hang the appliance yet.
NOTE: Measure the desired height from the oor and
ceiling to ensure there is room. Wall Mounted appliances
must be a minimum of 100mm from the oor.
5.16 Level the wall mounting bracket, adjusting if necessary.
Tighten the 4 screws.
5.17 Position the extension support brackets in position above the
xed wall mounting bracket, see Diagram 30.
30
Key Slots
5.18 Use the central brace to ensure the side brackets are
correctly spaced, see Diagram 31.
The central brace has soft fold tabs to lock in position.
Fold over to secure.
31
Key Slots
5.19 Mark the xing holes, remove the brackets and drill the xing
holes.
5.20 Replace brackets and secure with the screws.
Level the wall mounting brackets, adjusting if necessary.
Tighten the 4 screws.
5.21 Remove the 2 screws from the back of the top cast plate and
the screw under the grill, see Diagram 32.
32
5.22 Remove the ue insert and cast top plate.
WARNING: This appliance is heavy and should be
handled with care. Two people must be used to lift
this appliance.
5.23 Hook the top of the bracket under the top of the carcass
at an angle and lower gently into position. Ensure that the
bracket is fully engaged, see Diagram 33.
33
1
2
2 Screws
5.24 Secure through the base of the bracket from underneath with
the 2 screws provided, see Diagram 33.