Balanced Flue

21
Installation Instructions
3A. Direct to Hearth
The appliance sits on a mounting bracket to secure it in
place to either the hearth or bench.
3a.1 To x to a hearth, rst remove the mounting bracket from
beneath the appliance.
3a.2 Remove the plinth to access the controls:
1. Pull the lower section of the plinth forward to release from
the studs.
2. Lift the top section and tilt forward to clear the hooks
and slots on the front of the appliance, see Diagram 9.
9
3a.3 Access the bolts that secure the bracket, see Diagram 10.
Note the bracket can be accessed by tilting the appliance.
Take care to support.
10
3a.4 Place in the desired position on the bench and mark the
holes to drill the bracket screws, see Diagram 11.
11
3a.5 Remove the bracket and drill the guide holes.
3a.6 Fix the bracket in place.
3a.7 Position the appliance on the bracket and secure down
through the holes with the xing previously removed, see
Diagram 10.
3B. Plinth fixing
3b.1 To x to a hearth with a plinth, rst remove the mounting
bracket from beneath the appliance.
3b.2 Remove the plinth to access the controls:
1. Pull the lower section of the plinth forward to release from
the studs.
2. Lift the top section and tilt forward to clear the hooks
and slots on the front of the appliance, see Diagram 12.
12