Dimension Frames Installation User Instructions

1. General
1.1 These instructions are supplementary to, and must be read
in conjunction with, the installation instructions supplied with
the appliance. Read both thoroughly before installation.
1.2 Fitting of this decorative front is to be carried out after the
appliance has been installed.
Logic Hotbox/ Logic Convector
Ensure that the commissioning tests are carried out AFTER
the fitting of the front.
Logic HE/ E-Box/ E-Studio
Ensure that the commissioning tests are carried out
BEFORE fitting the front.
1.3 Ensure that these supplementary instructions are attached
to the Installation Instructions and leave with the user.
2. Fitting
1.1 Locate the top edge onto the tabs found at the top of
convector box and push down firmly to ensure correct fitting,
see Diagram 1.
1
1.2 Open the ashpan door and secure the frame at the base
with fixing screws as shown in Diagram 2.
2
3. Commissioning
Logic Hotbox/ Logic Convector
3.1 Continue with the commissioning tests, detailed in the
Installation Instructions supplied with the appliance.
4. Cleaning the Frame
4.1 Only clean the frame when it is cold.
4.2 The painted frame should be cleaned using a damp cloth
and buffed with a lint free duster.
Covering frame model numbers:
Model
Logic Hotbox & Convector (Manual & Remote only) 8681MB
E-Box™/ E-Studio™
Logic HE Convector (Manual & Remote only)
912-322
Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG
Technical Customer Services: [phone] Fax: [phone]
E-mail: [e-mail]
A member of the Stovax Group
E & O E