Designio2 Frame Installation User Instructions

3
2. Fitting the Subframe
2.1 Complete the installation of the appliance by following the
installation instructions supplied with the appliance.
Riva2 670 Balanced Flue Models
2.2 Before fitting the subframe it will be necessary to attach 2
Spire Clips to the tabs on the firebox, see Diagram 1.
1
Rear of Spire Clip
These allow the screws provided to hold the sub frame
securely in position.
2.3 Slide the Spire Clips over the tabs in the firebox ensuring
the flat side faces forward so the clip sits flush to the tabs,
see Diagram 2.
2
Before
After
The sub frame can now be fitted.
NOTE: The Riva2 670 Conventional Flue models do
not need Spire Clips and have the screws already in
place. These will need to be removed prior to fitting
the sub-frame.
Installation Instructions
Slide Control Models only:
Caution: When fitting the frame ensure that the
cutout fits around the slide mechanism, see
Diagram 3. Take care not to damage the slide
control handle during installation.
3
Slide Control Models only
The following instructions cover the fitting of the subframe
for all models.
2.4 Locate the wall mounting bracket so that the tabs locate in
the lugs on the top flange and the bracket rests against the
top edge of the top flange. Ensure the bracket is resting
centrally, see Diagrams 4 or 5.
4
Riva2 Balanced Flue Model
5
Logic HE model