Beat Front For use with the Gazco Logic HE Instructions for Use and Installation For use in GB, IE (Great Britain and Republic of Ireland) PR2643 Issue 1 (August 2018)
Installation Instructions Covering frame model numbers: Beat Front - Logic HE Black 901-350 1. General 1.1 These instructions are supplementary to, and must be read in conjunction with, the instructions supplied with the appliance. Read both thoroughly before installation. 1.2 Fitting of this frame and front is to be carried out after the appliance has been installed. 1.3 Ensure that these supplementary instructions are attached to the appliance installation instructions and leave with the user.
Installation Instructions 2. Commissioning Caution: When fitting the frame ensure that the cutout fits around the slide mechanism, see Diagram 3. Take care not to damage the slide control handle during installation. If fitting the decorative frame and front ensure that the commissioning tests are carried out BEFORE fitting the front. 3 3. Fitting the Frame Slide Control Models Only The foam seal must be fitted to the appliance prior to attaching the Beat front. 3.
Installation Instructions 4. Fitting the Front 4.1 6 5. Cleaning the Frame & Front Place ash pan cover into position at base of the front, see Diagram 6. Ensure the appliance is cold before attempting to clean the frame and front. 5.1 All frames and fronts should be cleaned using a damp cloth and buffed with a lint free duster. 5.2 Access to the controls is behind the ash pan cover.