Computer Drive User Manual
Table Of Contents
- Step 1: Installing the hardware and software
- Step 2: Configuring the USB adapter
- Step 3: Configuring the TCP/IP protocol
- Turning the wireless emitter off
- Where to go from here
- Windows XP
- Windows98SE, WindowsMe, and Windows2000
- Getting Help
- Safety, Regulatory, and Legal Information
1
1
Windows XP
This chapter describes how to connect a
Gateway wireless Ethernet USB adapter
to your Windows XP computer and
configure Windows XP for a wireless
Ethernet network. Complete these tasks
in sequence:
■ “Step 1: Installing the hardware
and software” on page 2.
■ “Step 2: Configuring the USB
adapter” on page 6.
■ “Step 3: Configuring the TCP/IP
protocol” on page 13.
If you need to install and configure the
USB adapter for other versions of
Windows, see “Windows 98SE,
WindowsMe, and Windows2000” on
page 19.
8509438.book Page 1 Tuesday, August 12, 2003 1:23 PM