Computer Drive User Manual
Table Of Contents
- Step 1: Installing the hardware and software
- Step 2: Configuring the USB adapter
- Step 3: Configuring the TCP/IP protocol
- Turning the wireless emitter off
- Where to go from here
- Windows XP
- Windows98SE, WindowsMe, and Windows2000
- Getting Help
- Safety, Regulatory, and Legal Information
32
Chapter 2: Windows 98SE, Windows Me, and Windows 2000
www.gateway.com
6 Click the IP Address tab, then click Obtain an IP address
automatically.
7 Click OK to close the TCP/IP Properties dialog box.
8 Click OK to close the Network dialog box.
9 Click X to close the Control Panel window.
10 Repeat this procedure for every computer on your
network.
11 After you set up the IP addresses on all your
computers, go to “Where to go from here” on page 36.
8509438.book Page 32 Tuesday, August 12, 2003 1:23 PM