Quick Reference Guide

CHAPTER4: Upgrading Your Computer
52
8 Find the memory module banks on your system board.
9 Press the plastic tabs on either side of the memory
module bank you are installing the new module into. If
a module is already in the slot, remove the module.
10 Align the notches on the new module with the notches
on the memory module bank, then press the module
firmly into the bank. The tabs on the sides of the memory
module should secure the memory module
automatically.
11 Secure the power supply to the computer using the four
screws you removed previously.
12 Insert the hard drive cage back into the computer.
13 Press the optical and 3.5-inch drive cage down until it
clicks into place, then reinstall the drives you removed.
8512730.book Page 52 Thursday, September 20, 2007 9:38 AM