Quick Reference Guide

CHAPTER 13: Adding and Replacing Components
136
Replacing the I/O board
To replace the front I/O panel:
1 Remove the side panel by following the instructions in “Removing the side panel” on
page 121.
2 Remove the bezel by following the instructions in “Removing the front bezel” on page 122.
3 Disconnect the cable from the I/O panel.
4 Remove the screw that secures the I/O panel to the computer, then remove the I/O panel
from the computer.
5 Insert the new I/O panel board into the computer, then replace the screw.
6 Connect the I/O panel cable to the new I/O panel.
7 Replace the front bezel by following the instructions in “Replacing the front bezel” on
page 123.
8 Replace the side panel by following the instructions in “Replacing the side panel” on
page 123.
Important
The color and shape of your replacement component's front cover may vary from
your original component.
Screw