Quick Reference Guide

CHAPTER 13: Adding and Replacing Components
132
Replacing the rear fan
To replace the rear fan:
1 Remove the side panel by following the instructions in “Removing the side panel” on
page 121.
2 Disconnect the fan from the system board.
3 Remove the four screws that secure the fan to the back of the case, then remove the fan.
4 Place the new fan on the back of the computer, then replace the screws that secure it to
the back cover.
5 Reconnect the fan cable to the system board.
6 Replace the side panel by following the instructions in “Replacing the side panel” on
page 123.
7 Reconnect all external cables and the power cord.
8 Turn on your computer.
Tip
You need a Phillips screwdriver to replace the rear fan.
Screws
Screws