User Guide

49
Replacing the LCD panel inverter board
www.gateway.com
16 On the side of the inverter board closest to the bottom of the LCD panel,
connect:
■ The pink and white cable to the connector labeled CN2.
■ The blue and black cable to the connector labeled CN3.
17 Press the LCD panel into place, and make sure that all cables are safely
inside the computer behind the LCD panel. If you have difficulty pressing
the LCD panel back into place, first press the top of the panel into place,
then press the bottom forward and down.
18 Attach the LCD panel with the four screws, then set the computer upright.
19 Plug in the power cord, then turn on the computer to make sure that the
display has been repaired. If the display appears to be working, turn off
the computer and lay the computer down on its back again.
Warning The connectors should easily press into place. If you have
difficulty attaching a connector, it may be turned
upside-down. Turn the connector over and try again.