User Guide

48
Replacing Components in Your Gateway Profile 4
www.gateway.com
11 Remove the inverter board from the computer.
12 Hold the new inverter board by its edges, then align the mounting holes
with the standoffs and attach the screw to the new board.
13 Place the LCD panel back onto the computer.
14 Reattach the scaler board cable to the LCD panel.
15 On the side of the inverter board closest to the top of the LCD panel,
connect:
■ The blue and black cable to the connector labeled CN4.
■ The pink and white cable to the connector labeled CN5.
Tips & Tricks Mark or label the removed board as “defective” to prevent
confusion with the new board.
Warning Do not press or apply pressure to the inverter board’s
components or plastic shields.