Quick Start Manual

www.gateway.com
91
4 Remove the disc from the drive and mark it with a
permanent marker.
5 If multiple discs are required, insert a new disc when
prompted, then click OK. Continue recording discs until
the process is complete.
Recovering pre-installed software and drivers
As a troubleshooting step, you may need to reinstall the
software and device drivers that came pre-installed on your
computer from the factory. You can recover using either your
hard drive or the backup discs you have created.
• New software—If you need to recover software that did
not come pre-installed on your computer, follow the
instructions provided with the software.
• New device drivers—If you need to recover device
drivers that did not come pre-installed on your
computer, follow the instructions provided with the
device.
To recover your pre-installed software and drivers:
1 Click (Start), All Programs, Gateway, then click
Gateway Recovery Management. Gateway Recovery
Management opens.
- OR -
If you are recovering from your driver and application
recovery disc, insert it into the disc drive, then go to
Step 3 after the Gateway Application Recovery main
menu opens.
Important
Write a unique, descriptive label on each disc, such as “Windows
Recovery Disc 1 of 2.” or “Apps/Drivers Recovery disc.”