User Guide

56
Replacing Gateway M275 Components
www.gateway.com
12 Loosen the three captive screws from the cooling assembly.
13 Lift the cooling assembly up and away from the convertible tablet PC.
14 Install the new cooling assembly in the convertible tablet PC.
15 Tighten the three cooling assembly screws in the numerical order marked
on the cooling assembly. Each screw hole has a numeral next to it.
16 Reassemble the convertible tablet PC.
Warning There is a thermal pad beneath the cooling assembly on
the system board. To replace this thermal pad, you must
remove and replace the system board.
Screws