User Guide

32
Replacing Gateway M275 Components
www.gateway.com
Replacing memory under the keyboard
Tools you need to complete this task:
Screws removed during this task:
To replace memory modules:
1 Disconnect the AC adapter and modem and network cables and prepare
the convertible tablet PC by following the instructions in “Preparing the
convertible tablet PC” on page 6.
2 Turn the convertible tablet PC over so the bottom is facing up.
3 Remove the battery by following the instructions in “Removing the
battery” on page 8.
4 Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 18.
5 Make sure that the convertible tablet PC is positioned so the top is facing
up.
Important Use only memory modules designed for the
Gateway M275 for upgrading the memory.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
4 chrome 2.5 × 2.5 mm
(keyboard)
2 chrome 2.5 × 6 mm
(keyboard cover)