Quick Reference Guide
Table Of Contents
- Contents
- About This Reference
- Hardware Basics
- Maintenance Basics
- Preventing static electricity discharge
- Opening the case
- Closing the case
- Adding or replacing memory
- Replacing the system battery
- Adding or replacing a CD or DVD drive
- Adding or replacing an optional diskette drive
- Adding or replacing the memory card reader
- Adding or replacing a hard drive
- Replacing the front fan
- Replacing the rear fan
- Replacing the power supply
- Replacing the heat sink and processor
- Replacing the I/O board
- Adding or replacing an expansion card
- Replacing the system board
- Safety, Regulatory, and Legal Information
- Index
CHAPTER 3: Maintenance Basics www.gateway.com
14
Removing the front bezel
To remove the front bezel:
■ Push on the three spring tabs, grasp the right side of the front bezel, then
pull the bezel out and away from the case.
Closing the case
Replacing the front bezel
To replace the front bezel:
1 Insert the tabs on the left side of the bezel into the slots in the left side
of the computer.
2 Swing the right side of the bezel in so the tabs on the right side of the
bezel go into the slots on the right side of the computer.
3 Press the right side of the bezel firmly until it snaps into place.