Quick Reference Guide

Adding or replacing a hard drive
www.gateway.com
23
6 Remove the hard drive bay screw.
7 Remove the hard drive bay from your computer. You may need to work
the bay out of your computer by rocking the bay back and forth.
8 If you are replacing an old drive, remove the four screws that secure the
hard drive to the hard drive bay, then remove the hard drive from the bay.
9 If you are adding a new drive (not replacing an old one), remove the four
screws (two on each side) from the empty hard drive bay.
Hard drive
bay screw
ScrewsScrews