Quick Reference Guide

CHAPTER5: Upgrading Your Computer

4 Loosen the four screws that secure the heat sink to the

system board, then remove the heat sink. (The screws

cannot be completely removed.)

5 Release the processor by pushing down on the lever,

then lifting the lever completely up.

Caution

The heat sink has Thermal Interface Material (TIM) located on the

bottom of it. Use caution when you remove the old heat sink or unpack

the new heat sink so you do not damage the TIM.

Screws

8512728.book Page 68 Wednesday, September 19, 2007 3:44 PM