Quick Reference Guide

CHAPTER5: Upgrading Your Computer

3 Remove the screw that secures the front I/O assembly

to the computer, then remove the I/O assembly.

4 Remove the screw that secures the front I/O panel board

to the computer, then remove the I/O panel board by

pushing it toward the back of the computer.

5 Disconnect the cable from the old I/O panel board and

connect it to the new I/O panel board.

6 Insert the new I/O panel board into the computer, then

replace the screw.

7 Place the front I/O assembly onto the computer, then

replace the screw.

8 Replace the front bezel by following the instructions in

“Replacing the front bezel” on page 52, then replace the

side panel by following the instructions in “Replacing the

side panel” on page 52.

Screw

8512728.book Page 70 Wednesday, September 19, 2007 3:44 PM