Quick Reference Guide

CHAPTER4: Upgrading Your Computer

4 Slide the drive release latch toward the back of the

computer to the Unlock position, then slide the drive or

card reader forward and out of the drive bay.

5 Slide the new drive or card reader into the drive bay, then

slide the drive release latch toward the front of the

computer to the Lock position.

6 Reconnect the drive cables using the notes you took

previously.

7 Replace the front bezel by following the instructions in

“Removing and installing the front bezel” on page38.

8 Replace the side panel.

Replacing the hard drive

To replace the hard drive:

1 Remove the side panel by following the instructions in

“Opening and closing the case” on page 37.

2 If you are adding a new drive, go to Step 6. If you are

replacing an existing drive, go to the next step.

8512736.book Page 44 Thursday, September 27, 2007 9:52 AM