User Guide

Replacing convertible notebook components

Replacing the Bluetooth module

Tools you need to complete this task:

Screws removed during this task:

To replace the Bluetooth module:

1 Complete the steps in “Preparing the convertible notebook” on page 5.

2 Remove the bay module by following the steps in “Replacing a bay module” on page 7.

3 If the convertible notebook has wireless networking built in, unplug the wireless antennas

by following the steps in “Replacing the IEEE 802.11 wireless card” on page16.

4 Remove the hard drive by following the steps in “Replacing the hard drive” on page 21.

5 Remove the hinge covers by following the steps in “Replacing the hinge covers” on page 26.

6 Remove the keyboard cover by following the steps in “Replacing the keyboard cover” on

page 27.

7 Remove the keyboard by following the steps in “Replacing the keyboard” on page 28.

8 Remove the LCD assembly by following the steps in “Replacing the LCD assembly” on page 40.

9 Remove the palm rest by following the steps in “Replacing the palm rest” on page 50.

Flat-blade driver Scribe or non-marring tool- OR -

Phillips #0 screwdriver

1 black 2.5*8.0 (Optional

bay module security

screw)

1 chrome 2.5*5.0 (Hard

drive)

2 black 2.5*8.0

(Keyboard)

4 or 6 black 2.5*8.0 (LCD

hinge to notebook)

14-16 black 2.5*8.0

(palm rest-bottom)

2 chrome 2.0*5.0

(palm rest-hard drive

bay)

3 chrome 2.0-0.4*2.0

(palm rest-modular

drive bay)

1 black 2.5*8.0 (palm

rest-top)