User Guide

Replacing convertible notebook components
54
10 Disconnect the fingerprint reader cable.
11 Remove the screws from the metal clips covering the ends of the fingerprint reader.
12 Lift the metal clips off of the fingerprint reader.
13 Remove the fingerprint reader from the convertible notebook.
14 Place the new fingerprint reader into the convertible notebook in the same orientation as
the old reader.
15 Lay the clips on the fingerprint reader, then replace the screws removed in Step 11.
16 Plug the fingerprint reader cable into the fingerprint reader.
Screw
Screw
Clip
Clip