User Guide

www.gateway.com
47
9 Remove the screws connecting the LCD panel to the LCD lid.
10 Remove the old LCD panel from the LCD lid.
11 Place the new LCD panel into the LCD lid.
12 Replace the screws removed in Step 9.
13 Feed the wiring back into the hinge.
14 Reconnect the tablet button board by following the instructions in “Replacing the tablet
button board” on page37.
15 Reconnect the inverter and reassemble the LCD assembly by following the instructions in
“Replacing the inverter” on page31.
16 Replace the LCD assembly by following the steps in “Replacing the LCD assembly” on page 40.
17 Replace the keyboard cover by following the steps in “Replacing the keyboard cover” on
page 27.
18 Replace the hinge covers by following the steps in “Replacing the hinge covers” on page 26.
19 Reconnect the antenna wires to the wireless card by following the steps in “Replacing the
IEEE 802.11 wireless card” on page16.
20 Replace the wireless bay cover by following the steps in “Replacing the IEEE 802.11 wireless
card” on page 16.
Tip
Start by feeding the wire that has the largest connector into the hinge. Then
proceed to the wire that has the next smallest connector and so on.
Screw
Screw
Screw
Screw