User Guide

Replacing convertible notebook components
42
12 Lift the LCD panel assembly up and away from the convertible notebook. The LCD panel
assembly is now completely detached from the convertible notebook.
13 Place the new LCD panel assembly onto the convertible notebook, then replace the two hinge
screws removed in Step 11.
14 Slide the antenna cables through the retaining clips, under the system board, then into the
wireless card area.
15 Plug the LCD video cable into the convertible notebook.
16 Reattach the three cables to the appropriate connectors on the system board.
17 Replace any tape that held the antenna wires and LCD cable.
18 Replace the keyboard cover by following the steps in “Replacing the keyboard cover” on
page 27.
19 Replace the hinge covers by following the steps in “Replacing the hinge covers” on page 26.
20 Turn the convertible notebook over so the bottom is facing up.
21 Replace the hinge screws removed in Step 3.
22 Reconnect the antenna wires to the wireless card by following the steps in “Replacing the
IEEE 802.11 wireless card” on page16.
23 Replace the wireless bay cover by following the steps in “Replacing the IEEE 802.11 wireless
card” on page 16.