User Guide

www.gateway.com
33
9 Align the new inverter with the screw hole, replace the screw that was removed in Step 8,
then reconnect the cables.
10 Press the LCD panel front and back together. Press the two halves together in several places
until they click in place. You should find no loose spots or spots where the two halves do
not meet.
11 Replace the LCD panel assembly screws removed in Step 5.
12 Replace the inserts removed in Step 4.
13 Replace the keyboard cover by following the steps in “Replacing the keyboard cover” on
page 27.
Caution
The larger rubber inserts go across the top of the panel.