Quick Reference Guide
Table Of Contents
- Contents
- About This Reference
- Checking Out Your Notebook
- Setting Up and Getting Started
- Working safely and comfortably
- Connecting the AC adapter
- Connecting the dial-up modem
- Connecting to a broadband modem or network
- Starting your convertible notebook
- Turning off your convertible notebook
- Restarting (rebooting) your convertible notebook
- Using the status indicators
- Using the keyboard
- Using the tablet control buttons
- Using the fingerprint reader
- Using the EZ Pad touchpad
- Using the display
- Using the digital pen
- Using the touch sensitive screen feature
- Adjusting the volume
- Turning your wireless radio on or off
- Using Drives and Accessories
- Managing Power
- Traveling with Your Notebook
- Maintaining Your Notebook
- Caring for your convertible notebook
- Cleaning your convertible notebook
- Maintaining the battery
- Cleaning CDs or DVDs
- Recovering your system
- Upgrading Your Notebook
- Troubleshooting
- Safety guidelines
- First steps
- Troubleshooting
- Audio
- Batteries
- Digital pen
- Diskette drive (external)
- Display
- DVD drives
- Ethernet
- File management
- Fingerprint reader
- Hard drive
- Internet
- Keyboard
- Media Center
- Memory
- Memory card reader
- Modem (cable or DSL)
- Modem (dial-up)
- Mouse
- Networks (wired)
- Networks (wireless)
- Passwords
- PC Cards
- Pointing device
- Power
- Printer
- Sound
- Status indicators
- Touchpad or pointing device
- Video
- Telephone support
- Legal Information
- Index
www.gateway.com
141
The printer will not turn on
• Make sure that the printer is online. Many printers have
an online/offline button that you may need to press.
• Make sure that the power cable is plugged into an
AC power source.
The printer is on but will not print
• Check the cable between the printer and your
convertible notebook. Make sure that it is connected to
the correct port.
• Make sure that the printer is online. Many printers have
an online/offline button that you may need to press so
the printer can start printing. Press the button to put
the printer online.
• If you are using a parallel port printer and the optional
port replicator, check the port and cable for bent or
broken pins.
• If the printer you want to print to is not the default
printer, make sure that you have selected it in the
printer setup.
To set a default printer:
1 Click or tap (Start), then click or tap Control
Panel. The Control Panel window opens.
2 Click or tap Hardware and Sound.
3 Click or tap the Printers.
4 Right-click or button-tap the name of the printer you
want to be the default printer, then click or tap Set
as Default Printer.
• Reinstall the printer driver. See the guide that came with
your printer for instructions on installing the printer
driver.
You see a “Printer queue is full” error message
• Make sure that the printer is not set to work offline.
To make sure that the printer is not set to work offline:
1 Click or tap (Start), then click or tap Control
Panel. The Control Panel window opens.
2 Click or tap Hardware and Sound.
3 Click or tap Printers.