Quick Reference Guide

www.gateway.com
69
Changing batteries
Replacing the main battery
To replace the main battery:
1 Disconnect your convertible notebook from the optional
port replicator.
2 If your convertible notebook is on and is connected to
AC power or has a charged multibay battery installed,
go to Step 3.
-OR-
If your convertible notebook is on, is not plugged into
an AC outlet, and does not have a charged multibay
battery installed, save your work and turn off the
convertible notebook.
3 Make sure the LCD panel is in notebook mode, then
close the LCD panel. For more information, see
“Converting from notebook to tablet mode” on page 43.
4 Turn your convertible notebook over so the bottom is
facing up.
5 Slide the battery lock to the unlocked position, then
slide the battery release latch.
Warning
Danger of explosion if battery is incorrectly replaced.
Replace only with a battery specifically manufactured for your Gateway
convertible notebook. Discard used batteries according to local hazardous
material regulations.
The battery used in this device may present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat above 212°F (100°C), or incinerate.
Dispose of used batteries promptly. Keep away from children.
Caution
If your convertible notebook is connected to AC power, or if it has a
charged multibay battery installed, you can change the main battery while the
convertible notebook is turned on. If your convertible notebook has only a main
battery and it is not plugged into an AC outlet, you must turn the convertible
notebook off while changing the battery.