Quick Reference Guide

CHAPTER 4: Using Drives and Accessories

Changing modules

Your convertible notebook’s modular bay supports different

bay modules, such as a CD, combination DVD/CD-RW, or

multi-format DVD±RW drive, or a multibay battery.

To change bay modules:

1 If you are removing a drive, make sure that there is no

disc in it.

2 Make sure that the convertible notebook is not in Sleep

or Hibernate mode.

3 Make sure that the LCD panel is in notebook mode, then

close the LCD panel. For more information, see

“Converting from notebook to tablet mode” on page 43.

4 Disconnect your convertible notebook from the optional

port replicator.

5 Turn your convertible notebook over so the bottom is

facing up.

6 Remove the modular bay lock screw (if one is present),

then slide and hold the module bay latch. The module

may move out slightly.

Caution

If you are replacing a multibay battery, turn off the convertible

notebook if it does not have a charged main battery and is not directly

connected to AC power.

Modular bay lock screw