Quick Start Manual

91
Replacing the air duct
www.gateway.com
Replacing the air duct
To remove the processor air duct:
1 Follow the instructions in “Preventing static electricity discharge” on
page 36. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2 Remove the top rear panel. For instructions, see “Removing the top rear
panel” on page 41.
3 Remove the inside panel. For instructions, see “Removing the inside panel”
on page 45.
4 Remove the screw that secures the AC power plug module to the back of
the server.
Screw